Kits
54T Steel Spur (0.8M)
- Product SKU: HRASJT254
- Category: 0.8M Spur Gears, E-Revo Driveline, E-Revo Hopup, E-Revo Parts, Gears, Jato Driveline, Jato Hopup, Jato Parts, Rally Driveline, Rally Hopups, Rally Parts, Slash Driveline, Slash Hopup, Slash Parts, Stampede Driveline, Stampede Hopups, Stampede Parts, Summit Driveline, Summit Options, Summit Parts, T-Maxx Driveline, T-Maxx Hopup, T-Maxx parts
Steel Spur Gear (54t 0.8 Mod)(Silver) - Traxxas
SJT254
Hot Racing 54 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4
FEATURES:
- CNC machined and lightened hardened steel construction
- Black oxide coating for durability and corrosion resistance
- Silver-colored countersunk washers
YOU WILL RECEIVE:
- 54 tooth 32 pitch spur gear
- Three (3) mounting screws
- Three (3) silver-colored countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
SPECIFICATIONS:
- Number of Teeth: 54
- Gear Pitch: 32 pitch (0.8 module)
- Mounting Holes: 3
- Tooth Face width: 6mm (0.24 inch)
- Internal diameter: ~11mm (~0.43 inch)
REQUIREMENTS:
- Hardened clutch bell or pinon gear
- Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
Steel Spur Gear (54t 0.8 Mod)(Silver) - Traxxas
SJT254
Hot Racing 54 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4
FEATURES:
- CNC machined and lightened hardened steel construction
- Black oxide coating for durability and corrosion resistance
- Silver-colored countersunk washers
YOU WILL RECEIVE:
- 54 tooth 32 pitch spur gear
- Three (3) mounting screws
- Three (3) silver-colored countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
SPECIFICATIONS:
- Number of Teeth: 54
- Gear Pitch: 32 pitch (0.8 module)
- Mounting Holes: 3
- Tooth Face width: 6mm (0.24 inch)
- Internal diameter: ~11mm (~0.43 inch)
REQUIREMENTS:
- Hardened clutch bell or pinon gear
- Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
